Description

LGX Low Gloss X-treme Premium Seal™ is a low gloss, color enhancing formula that extends surface life. This high-quality product protects commercial or high-traffic areas by creating a barrier against elements that stain and deteriorate the appearance, such as rust, dirt, pool chemicals, salt and everyday weathering.

Applications

• Concrete Pavers
• Wetcast
• Granite
• Marble/Travertine
• Limestone

Instructions

CLEAN

• Wait 28 days after installing polymeric sand before sealing.
• Thoroughly sweep surface of joint sand or loose material.
• Spot clean if needed with one of the SRW Specialty Clean™ products. Then, prepare the surface with an SRW Products General Purpose Cleaner.

CLIMATE

• After cleaning, wait at least 24 hours before sealing. Surface and joints must be completely dry.
• Recommended application temperatures are 50°F - 80°F (10°C - 27°C) from installation through the cure process.
• Do not apply if inclement weather is forecasted within 24 hours.

APPLY

• STIR THOROUGHLY
• Apply with an SRW Products approved Slit Foam Roller and sprayer.
• For best results, spray then back roll. This prevents an uneven finish. A 2-person application is recommended.
• Start at the highest project elevation. Do not allow sealer to pool on surface or in joints.
• Repeat if desired.

CURE

• Allow sealed area to dry and cure 24 hours.
• Protect area from water and rain until dry.
• Dry-tack free: 25 minutes
• Foot traffic: 24 hours
• Vehicle traffic: 72 hours

Note all calculations based on 68°F-77°F (20°C-25°C)