Description

Specialty Clean™ EF Efflorescence is a product which acts quickly to dissolve efflorescence on pavers, concrete, brick & clay.

Applications

• Pavers
• Concrete
• Brick/Clay

Instructions

PREP

• Thoroughly sweep surface of joint sand, dust, debris or loose material.
• Spot clean if needed with one of these SRW Specialty Clean™ products:
• CDX Cleaner & Degreaser X-treme
• RE  Rust Eliminator
• MC Mold, Moss & Mildew Cleaner
• OC Organic Stain Cleaner
• TR Tar, Gum & Rubber Remover
• Recommended application temperatures are 50°F - 80°F (10°C - 27°C)

WET

• Saturate surface & surrounding area thoroughly (including vegetation).
• Do not allow product to dry on surface. Re-spray if needed to keep area wet. A 2-person application is recommended.

APPLY

• Apply EF directly to surface with a sprinkler can. Do not dilute.
• With a stiff bristle brush, scrub area immediately & thoroughly.
• For large areas, work in 100-150 sq. ft. (9.29–13.94 sq. m.) sections.
• If working on an incline, start at the highest point, working in small sections. Scrub from bottom of section, pushing excess EF up over job.

RINSE

• Immediately rinse surface & surrounding areas (including vegetation) thoroughly with clean water until all traces of foam disappear.
• Repeat if necessary. Let dry.
• Wait at least 24 hours to apply SRW Paver Seal™ products.