• 1555 Colebrook Rd Lebanon , PA 17042
Dual Wash

SRW Dual Wash

Dual Wash is designed to remove ground-in dirt & poly haze
Call To Order

The best seal starts with a clean surface, and each hardscape surface has distinctly different qualities. Whether it’s removing dirt from natural stone or residue from wetcast, the Dual Wash is designed to remove ground-in dirt, light grease, oil and mold release agents to ensure the surface has an optimal bond with the sealer.

Applications

  • Wetcast
  • Granite
  • Limestone
  • Marble/Travertine
  • Bluestone/Sandstone

Instructions

PREP

  • Thoroughly sweep surface of joint sand, dust, debris or loose material.
  • Spot clean if needed with one of these SRW Specialty Clean™ products:
  • CDX Cleaner & Degreaser X-treme
  • MC Mold, Moss & Mildew Cleaner
  • OC Organic Stain Cleaner
    Recommended application temperatures are 50°F – 80°F (10°C – 27°C)

WET

  • Dilute equal parts DW Dual Wash with warm clean water.
  • Saturate surface & surrounding area (including vegetation) thoroughly with water.
  • Do not allow product to dry on surface. Re-spray with water, if needed, to keep area wet. A 2-person application is recommended.

 

APPLY

  • Apply mixture directly to surface with a sprinkler can.
  • Scrub with a stiff bristle brush. Let sit for 5 minutes. Keep wet. Rescrub.
  • For large areas, work in 200 sq. ft. (18.58 sq. m.) sections.
  • If working on an incline, start at the highest point, working in small sections. Scrub from the bottom of the section, pushing excess DW Dual Wash up over job.

RINSE

  • Immediately rinse surface & surrounding areas (including vegetation) thoroughly with clean water until all traces of cleaner are gone.
  • Repeat if necessary. Let dry.
  • Wait 24 hours before applying an SRW sealer.